AT-9000 Switch Command Line User’s Guide
Section V: Port Trunks 477
SHOW LACP SYS-ID
Syntax
show lacp sys-id
Parameters
None.
Mode
Privileged Exec mode
Description
Use this command to display the LACP priority value and MAC address of
the switch. Figure 88 illustrates the information.
Figure 89. SHOW LACP SYS-ID Command
The LACP priority value is set as an integer with “LACP SYSTEM-
PRIORITY” on page 470 and displayed in hexadecimal format by
this command.
Example
awplus# show lacp sys-id
System Priority: 0x0080
Mac Address: 00-15-77-CC-E2-42
To Next Page
Loading...
