AT-9000 Switch Command Line User’s Guide
Section X: Network Management 963
SHOW LLDP STATISTICS
Syntax
show lldp statistics
Parameters
None.
Mode
User Exec mode and Privileged Exec mode
Description
Use this command to display the LLDP statistics for the entire switch. Here
is an example of the information.
Figure 158. SHOW LLDP STATISTICS Command
The information the command displays is explained in Table 93.
Global LLDP Packet and Event counters:
Frames: Out ................... 345
In .................... 423
In Errored ............ 0
In Dropped ............ 0
TLVs: Unrecognized .......... 0
Discarded ............. 0
Neighbors: New Entries ........... 20
Deleted Entries ....... 20
Dropped Entries ....... 0
Entry Age-outs ........ 20
Table 93. SHOW LLDP STATISTICS Command
Statistic Description
Frame Out Number of LLDPDU frames transmitted.
Frame In Number of LLDPDU frames received.
Frame In Errored Number of invalid LLDPDU frames
received.
Frame In Dropped Number of LLDPDU frames received and
discarded.
To Next Page
Loading...
