Allied Telesis AT-9028 - Chapter 18: Port Mirror Commands; Table 27. Port Mirror Commands

319
Chapter 18
Port Mirror Commands
The port mirror commands are summarized in Table 27.
Table 27. Port Mirror Commands
Command Mode Description
“MIRROR INTERFACE” on page 320 Port Interface Creates the port mirror and adds ports
to the port mirror.
“NO MIRROR” on page 321 Port Interface Stops port mirroring completely.
“NO MIRROR INTERFACE” on
page 322
Port Interface Removes source ports from the port
mirror and deletes the port mirror.
“SHOW MIRROR” on page 323 User Exec and
Privileged Exec
Displays the destination port and the
source ports of the port mirror.