Chapter 48: Private Port VLAN Commands
672 Section VII: Virtual LANs
NO VLAN
Syntax
no vlan
vid
Parameters
vid Specifies the VID of the VLAN you want to delete. You
can specify just one VID.
Mode
VLAN Configuration mode
Description
Use this command to delete private port VLANs from the switch. You can
delete one VLAN at a time with this command.
Confirmation Command
“SHOW VLAN PRIVATE-VLAN” on page 674
Example
This example deletes a VLAN that has the VID 16:
awplus> enable
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# no vlan 16
To Next Page
Loading...
