Alpine iLX-507E - Basic Unit Operations; Power Management and Volume Control

ALPINE iLX-F509E 68-41657Z84-A (EN)
11-EN
Turning Power On or O
When the ignition key is turned to ACC or ON, the opening
screen will be automatically displayed.
1 Turn the ignition key to the ACC or ON
position.
The unit turns on.
• When using the system for the rst time, the HOME
screen is displayed.
• When turned on, the unit displays the last screen that
was displayed before the ignition key was turned o.
For example, if the unit is in radio mode when ignition
is turned o, it will remain in radio mode when
ignition is turned back on.
2 To turn the unit to o, turn the ignition key to
the OFF position.
• The unit is a precision device. Careful handling of the unit
should provide you with years of trouble-free operation.
• Some of this unit’s functions cannot be performed while the
vehicle is in motion. Be sure to stop your vehicle in a safe
location and apply the parking brake before attempting these
operations.
Adjusting the Volume
Adjust the volume by touching / .
Volume decreases/increases continuously by touching and
holding
/ .
Volume: 0 to 35
Lowering Volume Quickly
Audio Mute function instantly lowers the volume level to 0.
1 Press the (MUTE) button to activate MUTE
mode.
The audio level will be 0 and the mute indicator will
ash.
2 Press the (MUTE) button again to bring the
audio back to previous volume level.
Turning o the Screen/Button
Illumination (Display OFF)
You can turn o the screen and button illumination without
changing the audio output.
1 Press and hold the (MUTE) button for at
least 2 seconds.
The screen/button illumination is turned o.
2 To cancel Display OFF mode, press and hold
the
(MUTE) button for at least 2 seconds or
touch the screen.
• When there is an interrupt such as an incoming hands-free
call, Display OFF is canceled.
Touch Screen Operation
You can operate the unit by using the touch panel display.
• Be sure to touch the onscreen button lightly with the pad of
your nger to avoid scratching the display.
Touch operation
Touch a button or list item on the screen lightly.
• If you touch a button and there is no reaction, lift your nger.
• Onscreen buttons that cannot be operated are dimmed.
Swipe operation
Move your nger lightly with a swipe.