ALPINE iLX-F509E 68-41657Z84-A (EN)ALPINE iLX-F509E 68-41657Z84-A (EN)
50-EN
Shuffle Play
Touch [ ] to select Shuffle Play mode.
Group :
A Group is selected randomly and songs
in the Group are played back in order.
After all songs are played in the Group,
the next Group is selected randomly.
All Tracks
:
All songs in the BLUETOOTH compatible
devices are played back in random
sequence. Any one song does not play
back again until all songs have been
played back.
Off
:
Shuffle mode is Off.
• Operations may differ depending on the connected Bluetooth
compatible device.
Searching for a Desired file
1 Touch [ ] (Search).
2 Touch your desired Folder name or File name.
• When you select a Folder name, repeat the same procedure to
select another Folder name or File name.
Connecting a Bluetooth Device
Registering a Bluetooth device in the unit enables
automatic connection.
If it does not connect automatically, run through the
connection procedure again.
1 Touch [ ] (Phone Setting).
The Device List screen is displayed.
2 Touch [Connect].
Bluetooth connection will start.
• For details, see “Displaying Device List” (page 14).
Disconnecting the Bluetooth
Connection
1 Touch [ ] (Phone Setting).
The Device List screen is displayed.
2 Touch [Disconnect].
The Bluetooth connection is disconnected.
• For details, see “Disconnecting the Connected Device”
(page 15).
Switching the connecting Bluetooth
Device
If multiple Bluetooth devices are registered in this device,
you can change the connection among the registered
devices.
1 Touch [ ] (Phone Setting).
The Device List screen is displayed.
2 Select the function of the connecting device
on the Function Select screen, and touch [OK].
The Function Select screen is displayed.
3 Select [Bluetooth Audio] in the Function
Select screen, then touch [OK].
A check mark is displayed for the selected function.
The connection will transfer to the selected device.
• For details, see “Connecting the Device Registered in the
Device List” (page 15).
y Device
ous for the driver to watch video while
ehicle. The driver may be distracted
ing ahead and an accident could occur.
orrectly so that the driver cannot
ar is stopped and the
ake is applied.
orrectly, the driver will be
atch video while driving and may be
om looking ahead and cause an
. The driver or other people could be
ed.
uxiliary Devices
es connected to the AUX terminals of the
ocedure described below.
AUX (Auxiliary) Setup” (page 19).
(HOME) button to select
y (AUX) mode.
y shows the Auxiliary (AUX) mode screen.
uxiliary (AUX) playback, touch
een to display the operation
y (AUX) operation screen is displayed for
onds.
afety, video is not displayed and only audio can be
ile driving.
s on the connected auxiliary device, refer to its
anual.
To Next Page
Loading...
