Alpine iLX-507E - Camera Operation and Guides; Camera Signal and Guide Adjustments; Front Camera Operation and Guide Control

ALPINE iLX-F509E 68-41657Z84-A (EN)ALPINE iLX-F509E 68-41657Z84-A (EN)
22-EN
Reverse Camera Signal Input Setting
When “Reverse Camera (Camera 1)” setting is [On], the
video input signal type can be chosen.
Setting item:
Reverse Camera Signal
Setting contents:
NTSC (Initial setting)/PAL
Camera 2 Setup
Set how the second camera is used.
Setting item:
Camera 2 Setup
Setting contents:
Off (Initial setting) / Front / Side / Other
• “Camera 2 Setup” is not available when the Camera Setup
screen is displayed using [Setup] of the Camera screen.
Camera 2 Signal Input Setting
When “Camera 2 Setup” setting is [On], the video input
signal type can be chosen.
Setting item:
Camera 2 Signal
Setting contents:
NTSC (Initial setting)/PAL
Camera Guide Setup
You can adjust the camera guide position.
Setting item:
Camera Guide Setup
1 Touch [Camera Guide Setup] on the Camera
Setup menu screen.
The camera guide adjustment screen is displayed.
2 Touch [Camera], and then touch a camera,
[Rear], [Front] or [Side], to adjust.
• The guide line of the Other Camera cannot be adjusted.
■
Rear Camera screen example
■
Front Camera screen example
■
Side Camera screen example
• When adjusting the side camera, touch [View], and then
[
] (Left steering) or [ ] (Right steering) to make the
guide line adjustment that matches the position of the steering
wheel in your vehicle.
3 Select a guide to adjust by touching [ ][ ].
4 Touch [ ], [ ], [ ] or [ ] to adjust the
position of the guide.
5 Touch [Back] or [Close] to complete the
adjustment.
• The setting can be returned to the default setting by touching
[Default].
Hitch Guideline Adjustment
Adjustment can be made only by Rear Camera.
1 Touch [View], and then touch [Hitch].
The Hitch adjustment screen is displayed.
2 touch [ ][ ]to select the guide to adjust.
3 Touch [ ], [ ], [ ] or [ ] to adjust the
position of the guide.
ack] or [Close] to complete the
t.
g can be returned to the default setting by touching
etup
etup
] or [ ] of “Brightness, Colour,
to set the picture quality
tness
tents:
nitial setting: 0)
olour of Picture
tents:
nitial setting: 0)
mage Contrast
tents:
nitial setting: 0)
e while Reversing
olume can be muted when the shift gear lever is
everse (R) position.
eversing
] (Off) or [ ] (On) of “Mute
ersing”.