18 MaxAgent for Lync Manual
To return the window to the set of tabbed pages, drag it by its title bar to the
dotted lines above the tabs area.
Agents Working Without a Desktop
Workgroup agents who don’t have a desktop to run MaxAgent can use
“Agent Extension Dial Tone” to handle most agent operations.
The MaxACD server provides a special number for this; any call routed to
this number from Lync through a Sip-Tie Trunk will be regarded as a
feature code request call. Once the call is connected, you will hear a dial
tone; at that point, enter a feature code (for example, #54 or #56) to perform
an operation.
To Next Page
Loading...
