To Next PageTo Next PageHow to fix 'e53 - Fan Motor High Temperatures' error on Alto-Shaam CT PROFORMANCE CTP6-10E Oven?
To address the 'e53 - Fan Motor High Temperatures' error on your Alto-Shaam oven, take these steps: * Check if the motor high limit is open or wired incorrectly. * If the LED on the motor control flashes, see error codes for motor control. * Check if the motor or fan wheel is locked. * Inspect for damages in the fan wheel.
What does 'E05 - VFD Comm Failure' mean on my Alto-Shaam Oven and how to fix it?
If your Alto-Shaam oven displays the 'E05 - VFD Comm Failure' error, you should: * Check for loss of power to the VFD. * Inspect for a VFD malfunction. * Check if the CAN cable is disconnected and ensure the CAN address is correct on the VFD.
What does 'E06 - Lower VFD Comm Failure' mean on my Alto-Shaam Oven and how can I fix it?
If your Alto-Shaam oven displays the 'E06 - Lower VFD Comm Failure' error, you should: * Check for loss of power to the VFD. * Inspect for a VFD malfunction. * Check if the CAN cable is disconnected and ensure the CAN address is correct on the VFD.
What does 'E101 - Ventless Hood Fault - No Pressure' mean on Alto-Shaam Oven?
If your Alto-Shaam oven displays the 'E101 - Ventless Hood Fault - No Pressure' error, you should: * Check if the power switch is on. * Check if the vent motor is turning in the proper direction. * Inspect the pressure switch for miswiring or defects. * Check if the filter(s) require cleaning or replacement.
What does 'E213 - Motor Over Current' mean on my Alto-Shaam Oven?
If your Alto-Shaam oven displays the 'E213 - Motor Over Current' error, you should: * Check if the fan wheel is blocked.
How do I fix the 'e57 - No Rinse Water' error on my Alto-Shaam Oven?
If your Alto-Shaam oven displays the 'e57 - No Rinse Water' error, you should: * Check if the water supply is shut off. * Check for low water pressure. * Inspect if the flow switch is dirty or defective. * Check the double water solenoid valve (Y3). * Inspect the relay board for high voltage issues.
How do I resolve 'E106 - Boiler Drain Pump Fault' on my Alto-Shaam CT PROFORMANCE CTP6-10E Oven?
If your Alto-Shaam oven displays the 'E106 - Boiler Drain Pump Fault' error, you should: * Check if the drain pump motor is running or defective. * Inspect the hall effect sensor for damage or miswiring. * Check if the motor is improperly wired.
What to do if Alto-Shaam CT PROFORMANCE CTP6-10E displays 'E20 - B11 Core Temperature Probe Single Point Fault'?
If your Alto-Shaam oven displays the error 'E20 - B11 Core Temperature Probe Single Point Fault', you should: * Clean probe receptacle pins with sandpaper. * Check the B11 single point core temperature probe with quick connect for defects. * Ensure the B11 single point core temperature probe wires are connected. * Inspect the B11 single point core temperature probe receptacle for defects and ensure its wires are connected.
General| Model | CT PROFORMANCE CTP6-10E |
|---|---|
| Category | Oven |
| Power Supply | Electric |
| Control Type | Digital |
| Construction | Stainless Steel |
| Features | programmable touchscreen controls |
