Maintenance Sorensen SGI Series
5-2 M550221-01 Rev U
No routine maintenance on the SGI Series is required, aside from periodic
cleaning of the unit and inspection, as required by the environmental operating
conditions.:
Once a unit is removed from service, vacuum all air vents, including
the front panel grill.
Clean the exterior with a mild solution of detergent and water. Apply
the solution onto a soft cloth, not directly to the surface of the unit. To
prevent damage to materials, do not use aromatic hydrocarbons or
chlorinated solvents for cleaning.
Check external connections for integrity of insulation, loose contacts,
and proper torque.
If there is any evidence of short-circuits or arcing, overheating, or
corrosion, contact the factory for recommended service.
To Next Page
Loading...
Need help?
General
