Ametek Sorensen SGI Series - Page 117

M550221-01 Rev U Index-1
INDEX
A
AC Input Connector, 3U, 2-6
Screw Torque, 2-6
Agency Approvals, 1-3
Analog Control Connector (J1), 3-39
Isolated Analog Voltage, 3-40
J1 Connector Pin-Out, 3-40
Return Connection, 3-40
C
Calibration and Verification
Remote Isolated Analog (Option), 4-5
Calibration and Verification, 4-1, 4-2
Calibration Date, 4-5
Constant-Current Mode, 4-3
Constant-Voltage Mode, 4-3
Resistive-Control Current Sources, 4-4
Calibration and Verification
Isolated Analog Constant-Current
Mode, 4-5
Calibration and Verification
Isolated Analog Constant-Voltage
Mode, 4-6
Calibration and Verification
Potentiometer Locations, 4-8
Constant-Current Mode, 3-11
Calibration and Verification, 4-3
Operation, 3-11
Constant-Power Mode, 3-33
Constant-Voltage Mode, 3-10
Calibration and Verification, 4-3
Operation, 3-10
Contents of Shipment, 2-1
Controls and Indicators, 3-1
Analog Control (J1), 3-39
Front Panel ON/OFF Switch, 3-2
D
Default Programming, 3-9
Display Brightness, 3-34
Display Elements, 3-14
E
Editing, 3-16
Aborting an Edit, 3-17
Electrical Characteristics, 1-3
Environmental Characteristics, 1-3
F
Flexible Cables, 2-7
Floating Negative Terminal, 2-4
Front Panel, 3-1
Front Panel Drawing, 3-1
Fuses, 5-3
H
Home Timeout, 3-34
I
Initial Start-Up, 3-9
Input Overcurrent Protection, 2-4
Circuit Breaker/Fuse Rating, 2-4
Input/Output Connections, 2-4
Connectors, 2-5
Input Overcurrent Protection, 2-4
Input Terminal Connections, 2-6
Lugs, 2-6