PN T900-013 Rev A
Personnel and Equipment Safety Information
This section describes important safety information to avoid personal injury and dam-
age to the equipment while installing, operating, maintaining, or servicing the equip-
ment. All safety regulations, standards, and procedures at the installation location
must be followed.
All personnel involved with the installation, start-up, operation, maintenance, service, or
troubleshooting of the ta7000R Gas Purity Monitor must review and follow these Warn-
ings and Cautions.
Before working on the ta7000R Monitor, read and understand the following Notes,
Warnings, and Cautions, regarding safety and other required information. Additional
Notes, Warnings, and Cautions included in individual procedures in this manual indi-
cate special conditions to consider during installation, before opening the ta7000R
Monitor and while working on it.
Read this manual before beginning the installation and operation of the
ta7000R Monitor. Failure to do so, and or use of the equipment in a manner
not specied in this manual or accompanying documents, may impair the
protection against re, electrical shock and injury originally provided by this
equipment. In addition, failure to follow the installation and start-up instruc-
tions may void the instrument warranty.
Improper installation, operation, or service of the ta7000R may result in per-
manent damage
If an electrical re occurs on or inside the ta7000R, extinguish it using
Class A, B, or C extinguishers.
Do Not Operate without Covers
To avoid electric shock or re hazard, do not operate this product with covers
or panels removed.
Use Caution When Lifting
Use caution when lifting the ta7000R from its crate.
vi | ta7000R Gas Purity Monitor
To Next Page
Loading...
Need help?
General
