Ametek ta7000R - Page 8

PN T900-013 Rev A
Ground the Product
Follow the grounding instructions provided in the “Installation and Start-Up”
chapter of this manual. Before making connections to the input or output
terminals of this product, ensure that the product is properly grounded.
Use Proper Fuse
To avoid re hazard, use only the fuse type and rating specied for this product.
Use Proper Power Source
Do not operate this product from a power source that applies more than the
voltage specied.
Do Not Operate with Suspected Failures
If you suspect there is damage to this product, have it inspected by qualied
service personnel.
Do Not Operate in Explosive Atmosphere
To avoid injury or re hazard, do not operate this product in an explosive
atmosphere unless you have purchased options that are specically designed
for these environments.
viii | ta7000R Gas Purity Monitor