Ammann ARX 45 - Replacing the Ventilation Filter

Maintenance 101
1208531 | 03.07.2012
Fig. 9-18 Replacing the hydraulic oil filter, steps 4 to 6
6 Lightly oil the sealing ring on the filter lid.
7 Put the filter lid in place.
7.1 Tighten the lid with a torque wrench (max. torque, 20Nm).
Fig. 9-19 Replacing the hydraulic oil filter, steps 7 to 8
9.10.6 Replacing the ventilation filter
Fig. 9-20 Ventilation filter
Replace the ventilation filter (1) according to the maintenance plan.
4
4.1 5
87
1