Ammann ARX 45 - Anti-Adhesive; Switching on Anti-Adhesive; Advantages of Anti-Adhesive

78 ARX 4
1208531 | 03.07.2012
8.9 Anti-adhesive
Anti-adhesive is a water-soluble specialized liquid for combined rollers. The anti-
adhesive ensures an effective separation between the pneumatic surfaces and the
bitumen course.
The anti-adhesive tank filler neck is located on the left-hand side of the driver’s posi-
tion under the cover in the footplate.
Anti-adhesive reservoir volume: 12.5l
Fig. 8-10 Anti-adhesive reservoir filler neck
8.9.1 Switching on anti-adhesive
1 Press the bottom button (1) on the operating lever.
Anti-adhesive is admixed until you release the button.
NOTE The water sprinkler for the roller drum is controlled via the instrument panel.
8.9.2 Advantages of anti-adhesive
● No tearing of the course thanks to the good separating effect.
● Extremely low anti-adhesive consumption.
CAUTION
Hydraulic system heat-up!
The traction aid is active as long as the switch is in the "traction
aid" position. This function is not required in normal operating
mode. If constantly activated the hydraulic system is additionally
unnecessarily heated.
Only engage the traction aid when the machine is at standstill.
!
1