13. Disconnect wiring Before welding, please disconnect wiring, alternator, Ma-
chine’s electronics, and engine control unit. (symbol lo-
cated on the LH side of the control panel)
14. Electric apparatuses Cover electric apparatuses when washing the Machine.
(symbol located on the LH side of control panel )
15. Cooling liquid Cooling liquid is deleterious. Scald hazard during its ex-
change. Read Operation Manual! (symbol located on the
cooling liquid tank)
16. Cooling liquid Danger of scalding. Do not open the expansion tank lid
until the liquid cools down below 50 °C (122 °F). (Symbol
located on the inner side of the bonnet door)
17. Machine’s max height Caution when passing locations with height limit. (sym-
bol located on the left beneath the cabin, on the Machine
frame)
18. Noise emitted Machine’s external noise. (symbol located on the LH side
of the front frame)
To Next Page
Loading...
