2.6. Machine basic functions control
Operator seat (32)
Seat adjustment:
1 Backrest position
2 Arm support position and lifting
3 Seat turning
4 Seat shifting
5 Seat springing stiness according to weight indicator.
6 Seat height – grasp the seat and lift slowly to adjust seat
height in its next higher position and lock it there. Once
lifted to its highest position, the seat will drop back to its
lowest position.
Adjust your seat before driving !
Driver must be fastened with the seat
belt while driving!
How to swivel operator’s place:
Operator’s place can be swivelled within the range of 40° when
accelerator pedal is pressed. Once the pedal is released the op-
erator’s place is locked (arrested) in one of 4 positions.
Seat switch:
Seat switch is located in its cushion.
Description of seat switch function:
It is used to interlock the engine starting or to stop the Machine
if no operator sits on the seat.
Interlocking of engine starting:
When operator is not sitting on the seat the Machine cannot be
started.
Machine stopping:
If operator stands up from the seat while driving then the Ma-
chine will stop following 8 seconds.
Machine starting to move:
Its operator must sit down on the seat and shift the travel con-
trols (1) to neutral (N) and then select direction of running.
Do NOT load seat switch with other
objects!
To Next Page
Loading...
