Service menu continued ...
Main item Sub-item Sub Item Range Description
2.3 Recipe settings
(continued....)
<Recipe name> 1
<Recipe name>
12
Unit 2 DV 2 WT 0,0-30,0 s Pressure valve delay time 2
DV 2 0-100 ml pressure valve measurement quantity 2
Rinse 2 WT 0,0-20,0 s Pressure valve rinse water delay time 2
Rinse 2 0-15 ml
Pressure valve rinse water quantity). Is
automatically offset by DV 2
Topping WT 0,0-30,0 s Topping delay time
Topping
0,00-5,00 s
Topping product dispensing time
Cacao WT 0,0-30,0 s Cocoa delay time
Cacao
0,00-5,00 s
Cocoa product dispensing time
Mixer 2 WT 0,0-30,0 s Delay time Mixer 2
Mixer 2
Running time 0,0-10,0 s Mixing time Mixer 1
Speed 1 20-100% 1st speed Mixer 1
Time speed 1 0-100% Time 1st speed Mixer 1
Speed 2 20-100% 2nd speed Mixer 1
DV 4 WT 0.0-30.0 s Pressure valve 4 delay time
DV 4 0-100 ml
Pressure valve 4 dispensing quantity
(hot water dispensing)
DV 5 WT 0.0-30.0 s n.a.
DV 5 0-100 ml n.a.
Range ingredient
Coffee strength 0-10%
With the strength range item an ingredient
can be added to the strength control.
Ingredient strength control:
0 = off / >1 = on
Example: [coffee] 5%
-5% -2.5% 0 2.5% 5%
Topping strength 0-10%
Cocoa strength 0-10%
Unit sequence
Unit 1-2
Unit 2-1
Set the unit sequence here.
For example, Coffee with Milk:
Unit 1-2 rst Coffee (unit 1) then milk
(unit 2).
Cappuccino and/or Latte macchiato:
Unit 2-1 rst Milk (unit 2) then Espresso
(unit 1).
KW 3 WT
0.0-30.0 s Cold water valve 3 delay time *
KW 3
0-100 ml
Cold water valve 3 dispensing quantity *
(* Optional cold water dispensing)
To Next Page
Loading...
