9. ELECTRONICS OVERVIEW
WARNING
During repair and/or maintenance activities, avoid
electrostatic discharges (ESD) to the control.
● Main control .................................................. 9.1
● Interface / display .......................................... 9.2
● Supply 100-240Vac / 24Vdc 65W ................. 9.3
● Grinder circuit board 230Vac / 230Vdc ......... 9.4
9.1 Main control
This control is the machine’s main control. The control
can be accessed by removing the left side panel.
On the control are the following major components;
● Fuse 6.3A S (art.no. 03391); to protect the control
supply.
● Battery 3V Li CR2032 (art.no. 02816); to maintain
the clock function when there is no supply to the
machine.
To Next Page
Loading...
