EasyManua.ls Logo

Animo OptiBean - Page 91

Animo OptiBean
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
91
2015/09 Rev. 1.2
EN
OptiBean /OptiBean XL
Display Possible cause Action
Out of order
Door open
For safety reasons, the machine
automatically switches off if the
door is opened.
The machine can be operated with the door
open by using the door pin.
Out of order
Stand-by
The machine is on standby.
This function can be set manually or auto-
matically.
Close door
Door lock not closed properly.
Hot water dispensing not possible.
Close door lock.
Out of order
Rinsing
Rinse program not activated in
time. The machine locks up.
Run the rinse program and follow
the instructions in the display.
See chapter 6. Maintenance / 6.1
daily rinsing program
Out of order
Cleaning
Cleaning program is not activated
in time. The machine locks up.
Run the cleaning program and fol-
low the instructions in the display.
6. Maintenance / 6.2 Weekly
rinsing program
Coffee
Place cup
no cup positioned under the spout. position a cup under the spout.
Coffee
place cup under
correct outlet
no cup positioned under the
correct the spout.
position a cup under the correct spout.
your drink has
canceled
the cup was taken away to quickly
keep the cup in position during the drink
preparation.

Table of Contents