Digital Video Recorder User Manual
16
Figure 2. 10 HDD Management
7. To initialize the HDD, click the Init button. Initialization will remove all the data saved in the HDD.
8. Click Next to enter the IP Camera Management window.
1) Click Search to search the online IP Camera. The Security status shows whether it is active or inactive.
Before adding the camera, make sure the IP camera to be added is in active status. If the camera is in
inactive status, you can click the inactive icon of the camera to set the password to activate it. You can
also select multiple cameras from the list and click the One-touch Activate to activate the cameras in
batch.
2) Click the Add to add the camera.
Figure 2. 11 IP Camera Management
10.After finishing IP Camera settings, click Next to enter the Record Settings window.
11.Click the icon , and you can enable the continuous recording or motion Detection recording for all
channels of the device.
To Next Page
Loading...
