1-4 Instrument Care and Preventive Maintenance General Information
1-6 PN: 10580-00252 Rev. K Site Master User Guide
The battery that is supplied with the Site Master may need charging before use. The battery
can be charged while it is installed in the Site Master by using the AC-DC Adapter, or outside
the Site Master with the optional Dual Battery Charger. Refer to “Symbols and Indicators”
on page 2-9 for a description of battery symbols.
Figure 1-1. Battery Compartment
Note
Use only Anritsu Company approved batteries, adapters, and chargers with this
instrument. Anritsu recommends removing the battery for long-term storage of the
instrument.
Caution
When using the Automotive Power Adapter, always verify that the supply is rated
for a minimum of 60 Watts at 12 VDC, and that the socket is clear of any dirt or
debris. If the adapter plug becomes hot to the touch during operation, discontinue
use immediately.