10-4 Installing MST Master Software Tools
10-2 PN: 10580-00252 Rev. J Site Master User Guide
10-4 Installing MST
MST is provided on the CD-ROM included with the instrument. Insert the CD-ROM into a PC
to run the installer. Follow the onscreen instruction.
10-5 Connecting to the Instrument
Use the USB cable supplied with the test instrument to make the connection.
1. Connect the USB cable to the USB-A port on the computer and to the USB-min B port
on the test instrument.
2. Turn on the test instrument. Run the Master Software Tools program.
3. Pull down the Connection menu and click on Connect – USB. This establishes
communication to the test instrument.
For Ethernet connection refer to Chapter 7, “Ethernet Connectivity (Option 411)”.
10-6 Updating Site Master Firmware
Refer to “Updating the Site Master Firmware” on page 5-9.
To Next Page
Loading...
