7-2 Ethernet Connection Ethernet Connectivity (Option 411)
7-2 PN: 10580-00252 Rev. J Site Master User Guide
4. Configure the computer for direct Ethernet connection:
a. On the computer running MST, double-click on the local area connection
associated with Ethernet crossover cable connection (Start menu > Settings >
Network Connections > Local Area Connection x).
b. Click on the Properties button, then double-click on Internet Protocol (TCP/IP).
c. Select Use the following IP address (or Alternate Configuration) and enter the
following information:
IP: 10.0.0.1
Gateway: 10.0.0.1
Subnet: 255.255.255.0
d. Close all the open windows and restart the computer and the Anritsu handheld.
5. Open Master Software Tools, press the Network tab then the Query Network for
Instruments button. Double-click on the instrument to complete the connection. The
instrument model and IP address (10.0.0.2) along with a green connection icon will be
displayed at the top of the MST window.
Note The following steps may disable network and/or internet access.
To Next Page
Loading...
