Anviz EP300 User Manual

Click the [Basic Parameter Setting]. The [Basic Parameter Setting] pops up:
Com port Communication delay time (1-5) sec.: The default time is 3s.
Network Communication delay time (1-20) sec.: The default time is 5s.
□ Communication failed, automatically exit current operation: If timeout is larger
than ‘Communication delay time’, software will automatically exit.
□ In Realtime Monitoring, voice prompts “Department name”: During real-time
monitor, if employee is access granted, the software will voice prompt employee
department and name.
□ Clear the data after downloading: After downloading records completed, delete
the record downloaded from machine automatically.
Click the button [OK] to save the setting.
5.5.2 T&A Status setting
Click the [T&A status setting] option, and the [T&A status setting] window pops up:
Click the state which is going to be modified. Input the status description.
[Retrieve from the selected terminal]: Download the T&A status from the selected
97

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm