Anviz EP300 User Manual

Log Setup
fLog Alert 3000
fRe-Verify 30
Press [←] or [→] key or number keypad to input time. Press [OK] key to confirm.
Then press [C] to save the setting.
Prompt: if the same finger is identified continuously in re-verify time period, only the
first record will be saved in device memory.
2.4.11 Hardware Test
Test the functions of machine keys, LCD, voice, scanner and data area.
In [Setup] menu, select [Hardware Test] option,
Setup
System
Log Setup
fHardware Test
Press [OK] to enter setting interface as following:
Hardware Test ▼
fKeypad
LCD
Voice
Press [←] or [→] key to choose testing option and press [OK] key to start.
Keypad: Select [Keypad] option, and press [OK] to enter keypad testing interface.
Then press any key to start keys testing (i.e. press key 3, if interface shows current key
as 3, it indicates the key 3 works).
Keypad
Current key
_
3_
Esc-C
LCD: press [←] or [→] key to select [LCD] option, and press [OK] to enter LCD
testing interface.
22

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm