Anviz EP300 User Manual

107
2. Minority employee fingerprint
false accepted
1. Add records manually
2. Adjust fingerprint matching
precision
3. Change another finger and enroll
again.
6.4 Clock’s time works fine, but FP scanner is off, employee cannot attendance
Reason Solution
1. Unit in dormancy status Press any key to activate.
2. Fingerprint scanner abnormal
Restart the machine or change the
fingerprint module
6.5 We do not use the ID + fingerprint mode to verify
Reason Solution
1. Wrong ID entered Enter the right ID
2. This user has no right to use
1:1 identification method
Set 1:1 identification method for this
user.
6.6 The unit beeps automatically when no one punches in/out.
Reason Solution
1. Direct sun light or too bright
light
Avoid direct sun light or other bright
light
2. Latent fingerprint on the
surface of sensor
Clean sensor surface (Adhesive
tapes recommended)
Please note: Should you have any other problems, please kindly email us the log
files in zip or rar (The log files are in Log directory in the installation directory of the
software)!

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm