Anviz EP300 User Manual

3 System Installation
First we should install background management software on the computer. Please
refer to the following steps.
3.1 Operation Environment
Hardware requirement
:
Pentium 266 and above; Pentium 500 and above is recommended; ⅡⅢ
128 Memory and above; Minimum 100M hardware space;
COM (USB Port);
CD-ROM (CD-ROM needed in installation);
VGA support 800*600 resolution and above;
Operation system
:
Microsoft Windows 2000/XP (Recommended);
Microsoft Windows Vista;
Microsoft Windows 7;
3.2 System Installation
Please insert T&A disc into CD-ROM and the disc will automatically run the
installation program. If not, please run setup.exe in the root directory of the disc. The
following window will pop up:
Click [Next] to continue installation (see the picture below):
32

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm