Anviz EP300 User Manual

User ▼
Enroll
fDelete
Verify Mode
Press [OK] key to enter the user deletion interface,
Delete
ID 000000
Input employee ID to be deleted. Press [OK] and enter delete confirm interface,
User Delete
008101
No-C Yes-OK
Press [OK] key to confirm with voice prompts: “Successfully”.
Press [C] to cancel.
Notice: Employee deletion will delete all info of the employee and can’t resume.
Please take caution!
If the machine doesn’t have such an employee ID, the system will prompt,
Delete
No Enroll!
2.3.3 Verify Mode
Setting verify mode of the staff, there are two modes: ANY, PW+FP and ID+FP.
In [User] menu, press [→] key to [Verify Mode] option:
9

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm