Anviz EP300 User Manual

menu.
User Recovery
OK! 100%
Esc-ESC
2.6 System Info
[System Info] shows the current usage status of device, such as user quantity,
fingerprint quantity, records quantity and the firmware version etc.
In [MENU] menu, press [→] to select [System Info] option,
MENU a
fSystem Info
Press [OK] key to enter system info interface, and check info of correct operated
device.
System Info b
fUser 1000
fFP Enroll 1000
fGlog 5000
System Info a
fSoftVer e02.20.03
User: Registered user number in device
FP Enroll: Registered fingerprints number. Select it and press [OK] key and you
can check the same password enrollment number.
System Info b
fUser 1000
fPWD Enroll 1000
fGlog 5000
Prompt: display info will be based upon different device configuration.
Firmware version: the firmware version of program which write in EROM or
EPROM (Programmable read only memory). The so-called firmware is firm program
saved in integrated circuit firmly, responsible for controlling and dealing with integrated
27

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm