Anviz EP300 User Manual

1 Product Introduction
1.1 Product introduction
The Fingerprint Time and Attendance Machine is our new generation wall mounted
fingerprint time attendance machine which is released in 2010. It uses the USA TI
300MHz military high speed CPU and USA BioNano V10.0 core fingerprint algorithm
which is 30% higher in the idenitification speed compared with the last verion algorithm.
And the unique fingerprint positioning design is used in the terminal.
Thiss machine supports the plug&play USB communication. And the standard USB
power can be used as power input.
1.1.1 Product Features
y USA TI 300MHz high speed CPU;
y USA BioNano core fingerprint algorithm of high speed and stability;
y New generation fully sealed, waterproof and dustproof fingerprint sensor;
y User name display and human voice prompt;
y Realtime data transfer and WEB online tracking;
y Identification method: FP, ID+FP, ID+PW;
y EP10: Standard (USB communication);
y EP20: Portable (USB communication + high capacity Lithium battery);
y EP30: TCP/IP (USB communication +TCP/IP);
y EP300: Advanced (TCP/IP + high capacity Lithium battery);
y Fingerprint capacity: 2000; Record capacity: 50000;
y Identification speed: <0.5 second;
2

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm