Anviz EP300 User Manual

[Synchronize time]. Following message box pops up:
Click the button [OK] to confirm or click the button [Cancel] to cancel.
Some operation information displays in the main interface as follows:
[2009-03-18 13:49:24]Synchronizing time...
[2009-03-18 13:49:25]1[Head office]Synchronization successful!
5.1.6 Initialize Unit
The device will resume to factory settings. All data will be cleaned up. Attention
should be taken for this operation!
Click the button [Initialize Unit]. Following message box pops up:
Click the button [OK] to confirm or click the button [Cancel] to cancel.
Some operation information displays in the main interface as follows:
[2009-03-18 13:52:59]Initializing...
[2009-03-18 13:53:01]1[Head office]Initialization successful!
5.1.7 Terminal Parameter Settings
Click the button [Terminal Parameter]. The [Terminal parameter settings] interface
pops up:
79

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm