Anviz EP300 User Manual

[Sleep time (0~250 minute)]: How long dose the terminal turn to the sleep mode if
there is no one operating the terminal.
[Volume (0~5)]: The volume of the prompt sound in the terminal. The default value
is 3.
[Date format]: There are three kinds date format: yy-mm-dd, mm/dd/yy, dd/mm/yy.
[Time format]: There are two kinds time format: 24 hour and 12 hour.
[Matching precision]: There are three kinds: ‘Normal’, ‘Good’ and ‘Exact’. The
default value is ‘Good’.
[Record alarm threshold value (0-5000)]: If the rest memory space for the record is
less than the threshold value, the machine will alarm.
[Time period between repeated chocking (0~250 minute)]: The maximum value is
250 minutes. And the default value is 30s.
[Update the fingerprint template intelligently]: During fingerprint sensor
identification process, the senor replaces the lowest-quality data with new,
higher-quality data that it acquired in the matching process. This enables the sensor to
maintain high quality data at all times, saving the user from repeated authentication
attempts. Default status is limited.
Click the button [OK] to save the settings. Following message box pops up:
Click the button [OK] to confirm or click the button [Cancel] to cancel.
80

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm