Anviz EP300 User Manual

5.1.4.1 Set the IP Configuration
Click [Set the IP configuration] and open the window:
Select the check box and then modify the parameters. Click the button [OK] to save
[2009-03-18 13:26:14]1[Head office]Set the network parameters successfully
5.1.4.2 Terminal Information
Display terminal information as follows:
Click the button [Retrieve] to retrieve the terminal information. Click the button
[Cancel] to close the window.
5.1.4.3 Disable the manager
Delete the device manager.
Choice [Disable the manager] menu, the system will prompt as follow:
Click the [Ok] button to delete manager, Click [Cancel] to cancel the delete
operation.
78
[2010-11-22 14:10:00]1[Head Office] Clear the manager succeed.
5.1.5 Synchronize Time
Synchronize the Terminal’s time with the computer time. Click the button

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm