Anviz EP300 User Manual

new information. Click [Save] when ready.
Deletion of festivals or holidays:
Select the festivals or holidays you want to delete, and then click [Delete] to
perform Deletion of festivals or holidays.
4.4.2 Timetable and Shift
The relationship between shift and timetables:
Shift setup should be done in two steps: First, setup necessary timetables. Second,
setup shifts. One or more timetables can be included in one shift.
Timetable is the time period between On-duty and Off-duty required in the
company rule. For instance, the company rule requires the working hours be
08:00-12:00 and 13:00-17:00; so 08:00-12:00 and 13:00-17:00 are two timetables. If
such a shift needs to be setup, these two timetables should be setup first. Here, we use
time table “morning” to indicate “08:00-12:00” and time table “afternoon” to indicate
“13:00-17:00”; so two timetables have been setup. (Please refer to the following chapter
for details of how to add time tables) and then we can add a shift such as “Normal shift”
in which “shift cycle” and “cycle unit” will be setup. Then we should add two timetables -
“morning” and “afternoon” so that a shift setup is completed. Brief introduction is
mentioned here for you to get a general picture of the relationship between timetable
and shift. The details of shift setup will be found in the next two sections.
Timetable maintenance:
Click [Timetable and Shift] in [Attendance] menu. The following window appears.
Pic4.2
50

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm