Anviz EP300 User Manual

Place finger on the scanner window. If scanning finger scanning successful, the
system will prompt as following,
FP Enroll
Take off !
Remove finger, the system will prompt,
FP Enroll
Press Finger #2
Place the same finger on sensor scanner. If enroll successful, it prompts as
following,
FP Enroll
008101-1
Cancel-C Sav-OK
Press [OK] key to save fingerprint; Press [C] key to user registration interface.
The 2
nd
finger registration steps are as same as the 1
st
finger registration steps.
Password registration:
Enter [User] menu-[Enroll] option, Press [OK] key to enter user registration
interface. Input user ID, i.e. 8101,
Enroll
ID 008101
Esc-C Set-OK
Press [OK] key to continue,
7

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm