Anviz EP300 User Manual

In [User] menu, press [←] or [→] key to select [Admin Setup] option:
User ▼
fAdmin Setup
Admin
Clear
Press [OK] key to enter [Admin Setup] interface,
Admin Setup
Esc-C Add-OK
Press [OK] to start adding admin,
Admin Setup
ID 000000
Input the user ID i.e. 8101. Press [OK] key to enter admin setup save interface,
Admin Setup
008101
No-C Yes-OK
Press [OK] key again to confirm saving. After adding completed, exit to admin
setup interface.
Admin Setup
fID 008101
Esc-C Add-OK
You can press [OK] key to continuously add other managers, and press [C] to exit
as well.
After adding admin, it needs the verification of the admin’s fingerprint or password
11

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm