Anviz EP300 User Manual

Net ▼
fIP Address
Subnet Mask
MAC Address
Press [←] or [→] key to do net parameter setting.
[IP Address]: Press [OK] key to enter the [IP Address] interface,
IP Address
192 .168 .000 .218
Set-C Next-OK
Press [←] or [→] key or number key to input IP address. Press [OK] key to shift
between the 4 segments. After setting completed, press [C] key to enter IP address
save interface.
IP Address
192 . 168 . 000 . 219
Save?
No-C Yes-OK
Press [OK] key to save the modification. Press [C] key to cancel.
[Subnet Mask]: Press [→] key and shift to [Subnet Mask] option.
Net ▼
IP Address
fSubnet Mask
MAC Address 1
Press [OK] key to enter the [Subnet Mask] interface,
Subnet Mask
255 . 255 . 255 . 000
Set-C Next-OK
Press [←] or [→] key or number key to input subnet mask. Press [OK] key to shift
16

Anviz EP300 Specifications

General

Type	Basic access control reader
Resolution	500
Certification	FCC, CE
Product color	Black
Number of users	1000 user(s)
Housing material	Carbon
Scan speed (min)	0.5 mm/sec
Fingerprint reader	Yes
Authentication type	Access chip/card, Biometric, Password
Display type	LCD
Display size (HxV)	128 x 64 mm
Operating temperature (T-T)	-10 - 40 °C

Weight and Dimensions

Depth	35 mm
Width	185 mm
Height	130 mm