Apogee Symphony Desktop User’s Guide
Standalone Operation
Symphony Desktop may be used standalone (i.e not connected to a computer) with any digital audio
device equipped with S/PDIF or ADAT/SMUX optical I/O.
To configure for standalone operation, make the following settings from the touch screen:
1. Connect Symphony Desktop Optical output to the device’s Optical in; connect the device’s Optical
out to Desktop’s Optical in (as shown in figure 9).
2. In Touch Screen Control:
● Set Optical outputs 1-2 Routing to HW Inputs > Analog Inputs 1-2.
● Set the Main, HP1, and HP2 outputs to Direct HW Inputs > Optical In 1-2.
● See here for further details on Routing
3. Set the connected device’s clock source to Optical.
21
To Next Page
Loading...
