Apollo Thunderbolt Software Manual Working With Apollo 29
Accessing Apollo’s I/O in a DAW
Specifying the audio interface device
To access Apollo’s I/O within a DAW, the DAW’s audio engine must be configured to use
Apollo as the audio interface device. Specific instructions vary by DAW; consult the DAW
documentation for specifics.
See Setting the I/O in the audio software application for examples.
I/O Complement
The specific default inputs and outputs available, and their names, vary by Apollo model.
For complete lists of I/O channels that are available, see the Driver I/O Tables.
Note: Apollo’s I/O routes and I/O names can be customized in the I/O Matrix panel
within the Console Settings window.
Selecting Apollo’s Inputs and Outputs
When the DAW is configured to use Apollo as the audio interface device, the DAW’s audio
input and output channels can be routed to/from Apollo’s I/O via the device drivers.
Apollo’s inputs (left) and outputs (right) as they appear when configuring stereo I/O in Logic Pro X
To Next Page
Loading...
