Page 51
Send system warnings – enables the notifications related to Aranet PRO/PRO+ system events (like
reboot, shutdown, upgrade, main power failure, etc.)
Send sensor alarm – enables notifications related to sensor alarms (like threshold crossed, battery low or
battery empty)
Send “sensor returned to normal” alerts – enables notification related to sensor when its state has
returned to normal (for instance, measurement returned below threshold).
Alarms – set communication alarm creation rule: how many sensor’s measurements in a row are lost
before communication alarm is generated.
To send an e-mail and/or SMS notification to several recipients, please create additional user accounts and
configure their respective e-mail address and phone number.
3.6.9.2.1
Summary report
Summary report, if enabled and configured, will be sent once per day at a time (HH:00) specified by setting
“summary send time”.
The report will be sent in an email containing the following information:
• Minimum, average and maximum of Temperature, Humidity, CO2, Pressure, Voltage,
Current. Packet loss in percentage (with missing packet count and the maximum number of
packets lost in a row).
• Temperature, Humidity, CO
2
, Pressure, Voltage and Current
alarms when a threshold was
crossed (above or below) and its duration.
• Name of the sensor and name of group it belongs to.
• Battery warnings.
• Channel warnings (in case a sensor is using a different radio channel than the Aranet PRO
base station).
• Warnings about number of faulty data packets received.
• Sensor restart warnings including the number of restarts.
• Sensor error warnings.
• System information such as: how many days, hours, minutes the system has been running,
number of device reboots, number and duration of main power loss, number of factory and
network resets, current Firmware version and memory usage in %.
(1) summary information in the e-mail, like shown in the example below.
System information:
Running for 24 h 00 min
Device rebooted 0 times
Power lost 0 times (0 h 0 min)
Number of factory resets: 0
Number of network resets: 0
Firmware version: v1.4
Memory usage: 1% (40.7M/6.2G)
(2) Excel summary file as attachment to the notification e-mail, containing the above stated information
like shown in the example below.
To Next Page
Loading...
