68
001-15698-EN rev.12
Electromagnetic Emissions
Guidance and Manufacturer’s Declaration
Electromagnetic Emissions - For all Equipment and Systems
Maxi Sky 2 is intended for use in the electromagnetic environment indicated below.
The customer or the user of the Maxi Sky 2 should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
Maxi Sky 2 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B
Maxi Sky 2 is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
To Next Page
Loading...
