16Get Started
Arlo Go 2 LTE/WiFi Security Camera
User Manual
To monitor motion occurring farther away, such as on a lawn, aim the camera higher to frame
the area within the lower two-thirds of the image.
It’s best to position the camera so that motion is moving from side-to-side across its eld of
view rather than directly toward or away from the camera. Also, although the camera can
detect motion up to 23 feet (7 meters) away, the best area for motion detection is 5 to 20 feet
(1.5 to 6 meters) from the camera position.
Use camera positioning to aim your camera
Camera positioning is available only when the camera is not streaming, recording motion, or
using the Motion Detection test. During camera positioning, the camera streams video as fast
as possible, without buering. You can aim your camera while watching on your smartphone
and make near real-time adjustments to the camera position. This means that you might see
lower-quality video while you are positioning your camera.
To position your camera:
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the camera.
4. Tap Device Utilities > Camera Positioning.
The camera starts streaming video. The signal strength bar indicates the WiFi signal that
your camera is receiving at its current location.