Arlo Go 2 User Manual

52
8. SD Card Storage
You can insert a micro SD card (sold separately) into the micro SD card slot in your Go 2
Camera and store your Arlo recordings either in the cloud or on the SD card. If your camera
isn’t connected to the internet, recordings continue to be saved on the micro SD card. Your
Arlo app noties you when the SD card is low on storage space or is full.
Micro SD card format
Your Go 2 Camera accepts SD, SDHC (UHS-I), or SDXC (UHS-I) micro SD cards, Speed Class 10,
UH1 or U3, with capacity up to 2 TB.
If your micro SD card isn’t formatted, or is formatted with an incompatible le system, you can
use your Arlo app to format the micro SD card. See Format a micro SD card on page 54.
Install a micro SD card in your Go 2 Camera
1. Bring the Arlo Go 2 Camera indoors.
We recommend that you bring your camera indoors before removing its housing to avoid
potentially exposing the inside of the camera to water intrusion.
2. Press the release button to release the camera from its housing.
With a click sound, the camera slides partially out of the housing.
3. Pull the camera until it separates from the housing.

Arlo Go 2 Specifications

General

Type	IP security camera
Built-in light	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Maximum operating distance	91 m
Form factor	Bullet
Mounting type	Ceiling/wall
Product color	White
Country of origin	China
Ethernet LAN	No
Mobile network generation	4G
Field of view (FOV) angle	130 °
Detection distance	7 m
Alert notification type	E-mail, Push notification
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	7.62 m
Number of illumination LEDs	2
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Number of cameras	1
Digital zoom	12 x
Power source type	Battery
Operating temperature (T-T)	-20 - 45 °C
Sensor type	-
Harmonized System (HS) code	8525890000

Weight and Dimensions

Depth	120 mm
Width	64.2 mm
Height	86 mm
Weight	490 g
Package depth	179 mm
Package width	161 mm
Package height	115 mm
Package weight	792 g