Name: Arlo Go 2
Brand: Arlo
Rating: 5 (1 reviews)

To Next Page

To Previous Page

50Change Your Settings

Arlo Go 2 LTE/WiFi Security Camera

User Manual

Note: You can manually turn the spotlight on and o at any time from the camera feed by

tapping Spotlight

. You can also use the Low Light settings to control whether the spotlight

comes on automatically when your camera detects motion at night.

To change the low light settings for the spotlight:

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap camera.

4. Tap Video Settings > Low Light Settings.

5. Adjust the settings to customize your spotlight:

• Spotlight. Toggle the spotlight on and o. When the Spotlight setting is set to the On

position, the spotlight automatically turns on when your Arlo camera detects motion

at night.

• Color. Toggle color video recording at night on and o.

• Behavior. Select the spotlight behavior that you prefer: Constant, Flash, or Pulsate.

• Brightness. Use the slider to adjust the brightness level

• Night Vision. Toggle Night Vision on and o.

Adjust the audio settings

You can adjust the settings to turn the microphone o and on, and adjust the speaker.

1. Open the Arlo app.

2. Tap Settings > My Devices.

3. Tap the camera.

4. If you’re using a mobile device, tap Audio Settings.

5. Adjust the settings:

• Microphone toggle turns the microphone o and on.

• Speaker toggle and volume. To turn the speaker o and on, tap Speaker. To change

the speaker volume, move the Speaker Volume slider.

Other manuals for Arlo Go 2

Questions and Answers:

Need help?

Do you have a question about the Arlo Go 2 and is the answer not in the manual?

General