Arlo Go 2 User Manual

59Arlo Rechargeable Battery
Arlo Go 2 LTE/WiFi Security Camera
User Manual
Safe handling and usage guidelines for
removable and rechargeable batteries
Batteries can EXPLODE, CATCH FIRE, and/or CAUSE BURNS if disassembled, punctured, cut,
crushed, short circuited, incinerated, recharged (disposable cells), or exposed to water, re, or
high temperatures
To ensure optimal safety and performance:
• Only use Arlo batteries. If you are unsure whether a replacement battery or charger is
compatible, contact Arlo.
• DO NOT use this battery for anything other than its intended purpose.
• DO NOT use a battery if its case appears damaged, swollen, or compromised. Examples
include, but are not limited to, leaking, odors, dents, corrosion, rust, cracks, swelling,
melting, and scratches.
• DO NOT disassemble, crush, puncture, short external contacts, or dispose of in re or
water.
• DO NOT expose the battery to re or temperatures greater than 60°C (140°F). Do not place
the battery next to areas that may become hot. Examples include, but are not limited to,
on or near a space heater, cooking surface, cooking appliance, iron, radiator, or replace.
• DO NOT get the battery or the Arlo device wet. Even though they might dry and appear to
operate normally, the circuitry can slowly corrode and defeat its safety circuitry.
• DO NOT place the battery in a pocket, purse, or other receptacle containing metal objects,
such as keys, jewelry, or tools.
• DO NOT store the battery with hazardous or combustible material. Store in a cool, dry,
ventilated area.
• ALWAYS keep the battery away from children.
• DO NOT load the battery backwards. MAKE SURE the battery compartment is empty and
free of any moisture or loose debris before inserting the battery.
• AVOID dropping the battery or the Arlo device. Dropping it, especially on a hard surface,
might cause damage to the battery or the Arlo device. If you suspect damage to the
battery or the Arlo device, replace it.
• ALWAYS follow the directions in the Quick Start Guide and/or written in the Arlo Product
User Manual.
• ALWAYS follow local waste and recycling laws and guidelines to dispose of used batteries.

Arlo Go 2 Specifications

General

Type	IP security camera
Built-in light	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Maximum operating distance	91 m
Form factor	Bullet
Mounting type	Ceiling/wall
Product color	White
Country of origin	China
Ethernet LAN	No
Mobile network generation	4G
Field of view (FOV) angle	130 °
Detection distance	7 m
Alert notification type	E-mail, Push notification
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	7.62 m
Number of illumination LEDs	2
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Number of cameras	1
Digital zoom	12 x
Power source type	Battery
Operating temperature (T-T)	-20 - 45 °C
Sensor type	-
Harmonized System (HS) code	8525890000

Weight and Dimensions

Depth	120 mm
Width	64.2 mm
Height	86 mm
Weight	490 g
Package depth	179 mm
Package width	161 mm
Package height	115 mm
Package weight	792 g