40Modes, Rules, and Alerts
Arlo Go 2 LTE/WiFi Security Camera
User Manual
Rules for modes
Each mode uses one or more rules to control your Arlo system. You can set these options.
• Trigger device. The trigger device is the camera that detects motion. You can adjust the
motion sensitivity to minimize false alarms.
• Action device. The action device responds to motion detection on the trigger device. For
example, you might want your backyard camera or your driveway camera to trigger your
door camera to start recording video. You decide what action each camera takes when
motion is detected.
• Notications. When a trigger is detected, the Arlo can send you push notications, email
alerts, or both. You can also send email alerts to friends, family members, pet sitters, or
anyone who might need to respond when a camera is triggered.
Change motion sensitivity
You can edit a rule to change the motion sensitivity level for your cameras.
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera.
A list of modes displays.
4. Tap Edit
next to the mode.
5. Tap Edit
next to the rule.
6. Under If the following, tap Edit
next to Motion is detected.
7. Move the slider to adjust the sensitivity level for motion detection for this camera.
If you used a mobile device to specify the settings, your settings are saved.
8. If you used a browser to specify the settings, click Save.
Control whether the spotlight turns on when
motion is detected
Your Go 2 Camera includes an integrated spotlight. This spotlight is set to automatically turn
on when your camera detects motion at night. The spotlight improves video quality and
allows your camera to record video in color at night rather than in traditional black-and-