Arlo Go 2 User Manual

54SD Card Storage
Arlo Go 2 LTE/WiFi Security Camera
User Manual
Turn SD card recording o and on
1. Open the Arlo app.
2. Tap your Go 2 Camera.
3. Tap Storage Settings > SD Card Recording.
SD card recording toggles o and on.
Change the SD card Overwrite setting
By default, if the SD card lls up, the oldest Arlo recording is erased to make room for new
recordings. Files on the SD card that aren’t in the Arlo folder aren’t deleted to make room
for Arlo recordings. You can change the setting so that no Arlo recordings are automatically
erased.
1. Open the Arlo app.
2. Tap your Go 2 Camera.
3. Tap Storage Settings > SD Card Recording.
4. Tap Overwrite Automatically.
The overwrite setting toggles o and on.
Format a micro SD card
The Arlo app displays a message to let you know if you need to format the SD card. The Go 2
Camera can format the SD card.
1. Open the Arlo app.
2. Tap your Go 2 Camera.
3. Tap Storage Settings > SD Card Recording.
4. Tap the red Format SD Card button.

Arlo Go 2 Specifications

General

Type	IP security camera
Built-in light	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Maximum operating distance	91 m
Form factor	Bullet
Mounting type	Ceiling/wall
Product color	White
Country of origin	China
Ethernet LAN	No
Mobile network generation	4G
Field of view (FOV) angle	130 °
Detection distance	7 m
Alert notification type	E-mail, Push notification
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	7.62 m
Number of illumination LEDs	2
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Number of cameras	1
Digital zoom	12 x
Power source type	Battery
Operating temperature (T-T)	-20 - 45 °C
Sensor type	-
Harmonized System (HS) code	8525890000

Weight and Dimensions

Depth	120 mm
Width	64.2 mm
Height	86 mm
Weight	490 g
Package depth	179 mm
Package width	161 mm
Package height	115 mm
Package weight	792 g