46Modes, Rules, and Alerts
Arlo Go 2 LTE/WiFi Security Camera
User Manual
Enable or disable geofencing for friends’ mobile devices
1. Open the Arlo app.
2. Tap Mode.
3. Tap the camera.
A list of modes displays.
4. Tap Edit
next to Geofencing.
5. Tap Enabled Devices.
A list of mobile devices displays. A check mark appears next to the device name when
geofencing is enabled.
6. Tap one or more mobile devices.
The device location displays as either In Zone, Out of Zone, or Unavailable (if there’s an
issue contacting that device).
7. To disable geofencing, tap the mobile device again.
The check mark disappears when geofencing is disabled.
For more information, see Set up Arlo Geofencing on page 43.
Custom modes
You can add modes in addition to the modes that come with the Arlo app and give the new
modes custom names, such as Vacation. You can create one rule for each mode. You can
create multiple rules within the same mode, so that each camera performs dierent actions
and sends dierent alerts. You can also use Schedule mode to activate modes automatically
at dierent times of the day or week. (See Schedule when your camera is armed on page 42.
Add a mode
1. Open the Arlo app.
2. Tap Mode.
3. Tap the camera.
A list of modes displays.
4. Tap Add a Mode.
5. Enter the mode name and tap Next.