Arlo Go 2 User Manual

47Modes, Rules, and Alerts
Arlo Go 2 LTE/WiFi Security Camera
User Manual
6. Select the trigger device and tap Next.
This is the camera that detects motion.
7. Enter the trigger device settings for the When motion is detected section and then tap
Next.
8. Use the slider to set the motion sensitivity for the trigger device and tap Next.
Higher motion sensitivity settings usually trigger your camera to capture videos more
frequently.
9. Select an action device and tap Next.
This is the Arlo device that performs an action when the trigger device detects motion. You
can select the same Arlo device you’re using as a trigger or a dierent Arlo device.
10. Select an action such as Record video and tap Next.
If you’re using a computer web browser, you can also specify the recording time setting.
11. Select the notications for Arlo to send when motion is detected and then tap Next.
12. Review your settings and tap Save.

Arlo Go 2 Specifications

General

Type	IP security camera
Built-in light	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Maximum operating distance	91 m
Form factor	Bullet
Mounting type	Ceiling/wall
Product color	White
Country of origin	China
Ethernet LAN	No
Mobile network generation	4G
Field of view (FOV) angle	130 °
Detection distance	7 m
Alert notification type	E-mail, Push notification
LED type	IR
Infra-red wavelength	850 nm
Night vision distance	7.62 m
Number of illumination LEDs	2
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Number of cameras	1
Digital zoom	12 x
Power source type	Battery
Operating temperature (T-T)	-20 - 45 °C
Sensor type	-
Harmonized System (HS) code	8525890000

Weight and Dimensions

Depth	120 mm
Width	64.2 mm
Height	86 mm
Weight	490 g
Package depth	179 mm
Package width	161 mm
Package height	115 mm
Package weight	792 g